— BAMBOO BARRIER —
MATERIAL AND MANUFACTURING PROCESS
GEOMEMBRANE PROPERTIES (30 MIL).
**Properties for 40 mil, 60 mil, and 80 mil by request**
BAMBOO BARRIER INSTALLATION
Most bamboo will be sufficiently contained using a 24" (61 cm) barrier of 40 mil (.04"/1.02 mm) thickness. Certain types of bamboo or plantings on steep hillsides or soft loamy soils may require a 30" (76 cm) or 36" (91 cm) depth barrier. Please consult with your local bamboo specialist for recommendations for your planting site.
Dig a trench around the perimeter of the area in which you want to contain the bamboo. The depth of the trench should be 2" (5 cm) less than the depth of the barrier. If using the 24" (61 cm) barrier the trench should be 22" (56 cm) deep.
Insert the barrier into the trench. Overlap the barrier by four feet where the two ends meet and seal vertically with the double sided tape at each seam (see illustration). This prevents the rhizome from breaking through the seam. Make certain that the top of the barrier is 2" (5 cm) above the finish grade of the soil. This is to help retard rhizome overgrowth and make it easier to see rhizomes and cut them back before they hop over the barrier.
Plant the bamboo according to the nursery planting recommendations, paying attention to soil deficiencies, drainage and compaction.
Top of DeepRoot Barrier must be approximately 2" (52mm) above grade
Overlap ends of barrier by 4' (1.2m) and apply sealant tape vertically on inside and outside of planting area